Do You Need hp printer repair service or Maintenance ?
At Printer Repair Center (Uae tech) our qualified technicians are industry leaders in dubai Wide HP Printer Repair, Maintenance and Services. Instead of taking your heavy machinery to the workshopPrinter
Doesn’t Turn On:
There are many issues behind not turning on of printer, some of the reason are given below
logic board Problem,
formator board Problem
Main power supply Problem
Power cable Problem
Inside Printer Cable Problem
Power Adapter Problem
Power IC damage
Short logic board resistance
Power Ampere not workingproperly
Media Tray Issue
Some this message appears on printer screen with a full paper tray it could be a hardware issue or may need to update the drivers. For further assistance
Missing print while printing some documents may be because of wrong paper size configuration for this check the setting while giving print command or it might be because use of compatible toner.
Toner Light Still On
hp printer repair dubai Even after you replaced the empty cartridge with new one but still you might find the toner light is blinking or continuously on, for that you need to check the chip inserted on printer which use to check the cartridge or need to check the fuser placed on the font of toner. This is common error which you may found in almost all brand. No need to panic just call us for further assistance.
Slow Printing Issue
Sometime printer take time to print than expected time or do not meet the speed given on printer models because of the following reason:
High Resolution Print: Some time printer take time to print high resolution print so, do not worry about the speed.
Drivers issue: Because of the outdate driver of printer cause slow printing issue, it is recommended to install or update the new drivers.
Use of One Cartridge: Some model of printers allows to print in single use cartridge which affect the speed of print, we recommend to use of all cartridge and cartridge should installed properly
Connectivity Problem: Please check the connection of your printer if it wireless printer then check the strength of connection on your desktop or if it connect to ethernet cable please make sure connection is secure or try change the cable.
Use of USB cable: If your printer is connected to your computer by USB cable then length of cable also affects the speed it is better to have short USB cable.
Shift from two-sided to simplex mode will help you to increase the speed but you will use extra pages.
Busy System: If so many programs or applications is running at the same time of give printing command to printer will take time to start the print. For this just restart your system.
Supplies Memory Problem
This error is generally coming in HP printer which has a problem with the toner/cartridge chipwhich is not able to read. This is called electronic information or e-label printed on cartridgeto rectify this problem first we should simply restart the printer, if still there is problem reset the cartridge. If problem is not resolved it is a hardware problem you should dial the number on the website for free check-up of your printer.
Out of Paper
If this error comes in your printer and printer is not out of paper then it means there is issue with paper tray or paper senor. You need to make sure that your printer is on flat surface and there is no physical damage or dust on paper tray. If issue is not resolved please check the paper sensor or clean it properly.
No Cartridge or Toner Error
This error come on your printer because the printer is not able to recognise the cartridge on it
Or does not have cartridge in it. For this simply remove and insert the cartridge properly. If you face same issue please contact the UAE TECH.
Low Toner Problem
It simple to understand if you see this error on your printer which means either the ink is low or empty. For this just remove the toner and gently shake it to distribute the ink evenly, But still you face the same error please contact us as soon as possible on the number given on our website and one of our teams staff will assist you.
An I/O configuration is the set of hardware resources that are available to the operating system, and the connections between these resources. Here it means there is a connection problem between the Computer and printer. For this simply check the connection between the system and printer if it is connected via cable make sure cable is properly inserted at both ends, if still there is issue check with another cable.
If there is WIFI or wireless connection check the distance between them or the strength of connection in computer
Its a second forum - you can rename or delete it. It is your board so you can do whatever you want!
1 post • Page 1 of 1